Checking The Coolant Level - Toyota 2006 Prius Owner's Manual

Hide thumbs Also See for 2006 Prius:
Table of Contents

Advertisement

Oil identification mark
The ILSAC (International Lubricant Stan-
dardization and Approval Committee) Certi-
fication Mark is added to some oil con-
tainers to help you select the oil you
should use.
402
To
ensure
excellent
lubrication
mance for your engine, "Toyota Genuine
Motor Oil" is available, which has been
specifically tested and approved for all
Toyota engines.
Please contact your Toyota dealer for fur-
ther details about "Toyota Genuine Motor
Oil".

Checking the coolant level

CAUTION
The coolant heat storage tank reaches
high temperature inside. It is danger-
ous if hot coolant is discharged when
replacing.
For
replacement
coolant, contact your Toyota dealer.
Look at the see−through coolant reser-
voir when the hybrid system is cold.
The coolant level is satisfactory if it is
between the "FULL" and "LOW" lines
on the reservoir. If the level is low, add
perfor-
the coolant. (For the coolant type, see
"Coolant type selection" described be-
low.)
The coolant level in the reservoir will vary
with hybrid system temperature. However,
if the level is on or below the "LOW" line,
add coolant. Bring the level up to the
"FULL" line.
If the coolant level drops within a short
time after replenishing, there may be a
leak in the system. Visually check the
radiator, hoses, radiator cap and drain
cock and water pump.
of
the

Advertisement

Table of Contents
loading

Table of Contents