Steering; Braking - Kipor KGFC 350 Use And Maintenance Instructions

Drivers must adjust speed to the ground conditions, being careful of other
people nearby. Keep safety distance from other means. Above all, when
turning or driving on uneven grounds, always keep moderate speed.
It is extremely important to get
speeding it up.
Always accelerate
Always adopt moderate speed suitable to the ground conditions, never turn
suddenly.
Never move on slopes transversally, the machine might overturn towards
the slope.
6 . 3 . 2
6 . 3 . 2
It is very easy to steer the machine: in general, once you have engaged
transmission, the tracks move straight on. To turn right, brake the right
track by using the right handlebar and viceversa; if you use both
handlebars, the machine stops. The tighter you use the lever, the brisker
the steering.
Adjust turning speed to its radius, the smaller the turning radius the lower
the speed. A high speed turn may cause the machine to overturn on a side.
6 . 3 . 3
6 . 3 . 3
Release the clutch lever or enter the neutral speed to stop tracks
automatically.
In case of stop, bring accelerator to the "turtle" position to reduce engine
rotation to minimum.
Driving conduct
smoothly and carefully, never accelerate suddenly.
S t e e r i n g
S t e e r i n g
Overturning
B r a k i n g
B r a k i n g
used to operating the machine before
3 5
3 5