Installing Parts In The Tray - Konica Minolta bizhub press C1060 User Manual

2.2 Installation Procedures
10
Tighten the screw [1] (1 piece) and close the exit section [2].
Insert the ADU drawer [3].
11
Raise the ADU release lever M1 [1] by turning it clockwise.
12
Close the front door [1].
13
Store the removed fusing unit in the empty packaging of
EF-103.
NOTICE
Please wait until the fusing unit gets cold before storing it
in the packaging.
2.2.2

Installing Parts in the Tray

Depending on the size of the envelope to be used, the attached auxiliary guides need to be installed on Paper
Feeder Unit PF-707.
For details on the envelope size, refer to page 4-2.
NOTICE
Trays cannot be withdrawn when the machine is not powered. Plug the power cord of the machine into the
outlet, turn on the main power switch, then the sub power switch before performing the installation.
bizhub PRESS C1070/C1070P/C1060
2
2-5