ABB Freelance 2000 Manual page 2

Notice
Information provided in this manual is subject to change without prior notice and
represents no obligation on the part of ABB Automation Products.
The industrial standards and regulations (e.g. DIN, VDE, VDI, etc.) applicable in the
Federal Republic of Germany are used. Outside the Federal Republic of Germany, the
relevant national specifications, standards and regulations must be observed.
ABB Automation Products reserves all rights, especially those arising out of BGB,
UWG, UrhG as well as out of industrial property rights (patents, utility models,
trademarks, service trademarks and flavor samples).
The designations used and the products shown/mentioned in this manual have not been
specifically marked regarding existing industrial property rights.
No part of this manual may be reproduced without prior written permission from ABB
Automation Products.
Should you find any mistakes in this manual, please make a copy of the appropriate
page(s) and send it/them to us with your comments. Any suggestions which may help to
improve comprehension or clarity will also be gratefully accepted.
Please send your suggestions to:
Product Management Dept., DEAPR/LMS-Hannover, Fax: +49 (0)511 6782 701
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827