D 5.13 Selection Of Messages - ABB Freelance 2000 Manual

Section D
negate
Dimension

D 5.13 Selection of messages

All allocated tags in the project that have a faceplate and at least one message point are listed.
Using the buttons in the column headings, the list can be sorted by different entries. Search
criteria can be entered in the input fields above the list (see also Engineering Manual, IEC
61131-3 Programming, Tags).
Each line in the list is provided with a checkbox in which to mark the chosen message points.
Search criteria input fields:
Tag
Area
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
D-44
The value of the variable defined in Lock is negated for the purposes of
locking out operation of a radio button, i.e. to lock out operation of the
radio button, the variable must have a value of FALSE.
In the operation dialog and the operating protocol the process variable
values are displayed with the texts assigned in the column Text.
(e.g.: 'Variable speed: fast --> slow)
If the operated variable has an old value that is not part of the set of
configured values, the operating protocol represents both the old value
and the new value with its numerical value and additional the configured
dimension.
(e.g.: 'Variable speed: 40 --> 20 m/s)
Tag name; '*' and '?' may be used as wildcards.
Plant area, select from a list with all used areas of the project.
Graphic Display
tu0504us.bmp