D 5.23 List Of The Dynamic Objects In A Graphic Display; D 5.24 Reedit - ABB Freelance 2000 Manual

Section D
D 5.22.4 Set parameters for individual buttons using the button parameters window
The procedure is basically the same as configuring an individual button (see page D-62) but
the following special considerations must also be taken into account:
Variable
Value
disabled
A
CTION
Variable = Value

D 5.23 List of the dynamic objects in a graphic display

→ Animate → Reedit... → display of the object list
The object list is used for displaying all dynamic graphic objects in the current graphic display,
and for selecting one of them. After an object has been selected, it can then be modified using
the appropriate parameter definition dialog.

D 5.24 Reedit

A graphic object must be selected before its parameters can be changed. This can occur in two
ways: select the object in the graphic display and double-click on it, or use the alternative via
the Reedit menu...
→ Select dynamic graphic object → Animate → Reedit....
→ Animate → Reedit... → Display of the object list
All the dynamic graphic objects are displayed in the object list with their type and name. A
dynamic object that has been previously selected is preselected in the list. After an object has
been selected, clicking on OK or double-clicking on the list entry will call up the parameter
definition mask for the selected object
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
D-66
Not used for buttons in a button field, but for radio buttons, the
associated variable is shown here.
For radio buttons, the reference value of the associated variable is shown
here.
The selected button is removed from the button field, both in terms of
display and function.
The button is displayed in the chosen color and with the text or object
as specified.
Calls up the Action parameter-definition window. (see page D-38,
Configuring an action)
No function.
Graphic Display