D 5.21 Selection Area - ABB Freelance 2000 Manual

Section D
Interpolation
None
Linear
Stairs
Marker
None
Point/Pixels
Rectangle

D 5.21 Selection area

→ Animate → Selection area (select field)
→ A mouse click fixes the position of the top left-hand corner and, by pulling the
rectangle, the size of the selection area can be specified. Another click of the mouse
at this point concludes the procedure,
→ Enter data in the parameter mask,
→ Display the select field without frame.
A selection area enables tag faceplates to be called up in graphic displays. It is
also possible to change over into another specific display (graphic, group
display, trend,..) or to write a fixed or operated value to a process variable or to
acknowledge messages. In case of selection the configured action will be
carried out.
The field and the border of the selection area can be displayed visibly and
colored or they can lie transparent underneath other graphic objects.
On selecting the select field in the graphic display, a frame appears. The select
field can then be resized and moved.
di0532.bmp
A selection field is configured using the parameters on the Display and
General tabs.
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
D-60
Specify trend depiction.
No interpolation is performed,
Trend is interpolated in a linear fashion,
Trend is depicted in discrete steps.
Specify depiction of individual measured values.
Individual measured values are not marked,
Individual measured values are marked with points,
Individual measured values are marked with rectangles.
di0559uk.bmp
Graphic Display