D 5.8 Display Tab - ABB Freelance 2000 Manual

Section D

D 5.8 Display tab

Animation of a graphic object with binary process states means that the graphic object will be
displayed with changing graphic attributes. In addition to specifying pre-set colors, it is possible
to configure an object to take on the color of a message (message color is determined by the
message priority).
It is first determined which of a set of messages are active or pending. Then with one of the
functions most important message, newest message, oldest message or highest priority
message exactly one message is singled out. Both the foreground and background color of this
message, each with or without acknowledgment information, can be used for displaying the
object. In DigiVis, the process of singling out a message and updating the graphic object with
the current colors of that message is repeated once per update cycle.
Variables/functions
Bit1, Bit2, Bit3
Table
Bits
Status
Display
Msg
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
D-32
Display the configured bit variables and functions.
Displays the possible bit combinations of the binary variables.
Numbering of the states available for the graphic object.
On quitting the parameters mask, the dynamic object is displayed with
the attributes of the selected line in the graphic display.
This button is available when the state of the graphic object is determined
by messages. When it is selected, a dialog appears in which a message
can be singled out.
tu0903us.bmp
Graphic Display