Miele PT 5135 C OS Operating And Installation Instructions page 44

Problem solving guide
Problem
Water leaks from
the dryer after the
condenser unit has
been cleaned.
The interior drum
lighting does not
come on.
Power cuts.
44
Possible cause
– The inner cover of the
condenser unit has not
been locked properly
and/or the condenser unit
has not been positioned
correctly.
– Fluff has collected in the
condenser unit housing.
The lighting switches off
automatically (to save
energy).
– After the power supply has been restored, switch the
dryer on using the s button.
– Confirm with OK.
Remedy
– Ensure that the
condenser unit is
positioned correctly and
lock the inner cover.
– Check the rubber seals.
– Use a cloth to remove
any visible fluff from the
inside of the condenser
unit housing.
– It will switch on again
after the door has been
closed and then opened.
– If the lamp needs to be
replaced, follow the
instructions in "Changing
the lamp" at the end of
this section.