Toyota 2009 Camry Quick Reference Manual page 67

The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat step 2.)
Multi-information
display
Battery-saving function
n
In the following circumstances, the entry function is disabled in order to pre-
vent the 12-volt battery from discharging and the electronic key battery from
depleting.
When the entry function has not been used for 2 weeks or more
l
When the electronic key has been left within approximately 7 ft. (2 m) of
l
the vehicle for 10 minutes or more
The system will resume operation when...
The vehicle is locked using the door handle lock switch.
l
l The vehicle is locked/unlocked using the wireless remote control func-
tion. (→P. 47)
The vehicle is locked/unlocked using the mechanical key. (→P. 382)
l
1-3. Opening, closing and locking the doors
Unlocking doors
Hold the driver's door han-
dle to unlock only the
driver's door.
Hold the front passenger's
door handle except the
driver's door handle to
unlock all doors
Hold the front passenger's
door handle to unlock all
doors
Beep
Exterior: Beeps three
times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
1
41