Connections - Honeywell HICC-P-3100IRV User Manual

Network Camera User's Guide

Connections

1. RJ45 LAN socket: Connect to PC or Hub/Switch.
It's for connections to 10Base-T Ethernet, 100Base-TX, or 1000Base-TX Ethernet
cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission
speed of the network automatically. Please use Category 5 or better cable to connect
the Network Camera to an Ethernet network switch or hub.
In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power LED (orange color)
This LED is used to indicate whether DC power is on or not.
9/89