Suzuki GSX25 Owner's Manual page 32

SETUP INTRODUCTION
FRONT WHEEL
First, loose the lock bolt of the front axle
<D
which
is in the front fork. Then remove the front axle
<D
from the front fork. Install the front wheel as
shown in the left picture.
Tighten the front axle and the lock bolt to the
specified torque with an appropriate wrench.
.Front axle shaft torque: 44N. m.
.Lock bolt torque: 23N. m.
1
:
Front axle
2: Speedometer drive gearbox
3: Front wheel
-
4 : Spacer
5 : Spacer
6:Nut
WWER COWLING
Install the lower cowling @ to the motorcycle with
6 bolts
<D
as shown in the left picture.
1
: BoItCquantity: 6)
2: Lower cowling