Safety; Correct Use - Supra WLR-510 Instruction Manual

UK IRL
10

Safety

Correct use

The WLAN repeater is only suitable for private and not for
commercial use.
Only use WLAN repeater as described in the operating
instructions. Any other use is deemed to be incorrect and
can cause material damage and loss of data.
The manufacturers or dealers do not accept any liability
for damage resulting from improper or incorrect use.
Safety information
WARNING!
Electrocution hazard!
Faulty electrical installations or excessive mains
voltage can cause electrocution.
− Only connect WLAN repeater if the mains voltage of
the power point matches the voltage specified on the
rating plate.
−
The 230 V socket used or the WLAN repeater must be
freely accessible at all times, so that it can be quickly
disconnected from the mains when necessary.
− Do not operate the WLAN repeater if it is visibly
damaged.
General General
−
−
−
−
−
−
−
−
−
−
−
The WLAN repeater may not be taken apart, modified
or repaired. Danger of fire and electrocution.
Ensure adequate ventilation and do not cover power
supply to prevent overheating.
The WLAN repeater may not be operated with an
external timer or separate remote control system
Never immerse WLAN repeater or plug in water or
other fluids.
Never touch WLAN repeater with wet hands.
Install LAN cable in such a way that it does not beco-
me a trip hazard.
Do not kink LAN cable and do not install it over sharp
edges.
If the WLAN repeater shows signs of smoke, smells
burnt or makes unusual noises, disconnect from
mains immediately and do not operate.
Never store the WLAN repeater in such a way that it
can fall into a sink or wash basin.
Ensure that children do not push objects into the
WLAN repeater.
When not using or cleaning the WLAN repeater or in
case of a fault, always switch off WLAN repeater and
pull the mains connecter out of socket.
UK IRL
11