Wps Settings; Further Settings - Supra WLR-510 Instruction Manual

UK IRL
28
7. After the restart of the repeater has been completed,
the start page of the Web interface appears again.
You can now close the Browser.

WPS settings

The WPS function of the repeater is configured in the WPS
settings.
To use the WPS function, select the control box ACTIVATE.
PIN CODE: Shows the WPS pin code: This code is applied
when using WPS with Pin code. He must be known to the
Wireless client.

Further settings

NOTE!
The extended settings are provided for experi-
enced users with adequate network knowhow.
Only change these settings if you understand
the resulting effects on the router.
WLAN Settings (2.4G/5G)
− Radio status: Option for activating/deactivating the
wireless adapter for the 2.4G or 5G network.
− SSID: Option allowing retrospective changing of the
SSID
The Web interface The Web interface
− Encoding:Select Deactivate, WEP, WPA PSK, WPA2 PSK,
WPA/WPA2 PSK in order to set up an encoding or the
network.
− Channel: Option for setting another channel on which
the WLAN signal is transmitted.
Password settings
In this menu point, the password for the Web interface
can be determined.
Configuration tool
− Under entry "Save settings" you can save the current
configuration in a file so that it is available again once
the device is returned to the default settings.
− Use entry "Reinstate settings" to load a secure confi-
guration.
− Under entry "Reset settings" the device can be re-
turned to the default settings.
NOTE!
When resetting to the default setting all settings
and network codes are deleted!
UK IRL
29