Table of Contents
Advertisement
UK
IRL
Preface
7
Preface
Dear customer,
Congratulations on purchasing a high quality MAGINON
product.
You have chosen a modern WLAN repeater with excellent
technical equipment and respective accessory, which is
particularly easy to operate.
The WLAN repeater comes with a 3 year warranty. In case
of a defect in the WLAN repeater, you require the enclo-
sed warranty card and proof of purchase. Keep these in
a safe place.
Imprint
Issued by:
supra
Foto-Elektronik-Vertriebs-GmbH
Denisstr. 28A
67663 Kaiserslautern
Germany
Advertisement
Table of Contents
Summary of Contents for Supra WLR-510
- Page 1 The WLAN repeater comes with a 3 year warranty. In case of a defect in the WLAN repeater, you require the enclo- sed warranty card and proof of purchase. Keep these in a safe place. Imprint Issued by: supra Foto-Elektronik-Vertriebs-GmbH Denisstr. 28A 67663 Kaiserslautern Germany...
- Page 2 General General Explanation of symbols General The following symbols and signal words are used in Read and keep instructions these Operating Instructions, on the device or on the packaging. These Operating Instructions belong to this WARNING! This signal word indicates a WLAN repeater.
- Page 3 General General Safety − The WLAN repeater may not be taken apart, modified or repaired. Danger of fire and electrocution. Correct use − Ensure adequate ventilation and do not cover power supply to prevent overheating. The WLAN repeater is only suitable for private and not for −...
- Page 4 General General WARNING! Note! Hazard or children and persons with Danger of material damage! reduced physical, sensory or mental Incorrect use of the WLAN repeater can damage abilities (such as partially disabled, the device. older persons with limited physical and mental abilities) or lack of experience −...
- Page 5 General General − Damage to the electronics or accessory caused by Overview external influences such as impacts, falls or others are This WLAN repeater quickly and effectively extends the not covered by the warranty and are chargeable. range of an existing WLAN network. It supports WLAN standards 802.11 b/g/n in the 2.4 GHz- range and WLAN standards 802.11 a/n in the 5.0 GHz range.
- Page 6 Start Start Start SET-UP The WLAN repeater operates in dual band mode. This Preparing the WLAN repeater means that both 2.4G- and 5G-WLAN signals can be sent at the same time. For each of these WLAN standards an − Remove packaging material and all protective foil. individual WLAN network with a SSID (network recogni- Contents of box tion) is transmitted by the repeater, depending on the...
- Page 7 Start Start Devices containing only a LAN socket but no wireless NOTE! adapter (e.g. set -top boxes, printers...) can log into the When using the repeater for the first time, network via WLAN. place repeater closely to the Access Point to 1.
- Page 8 Start Start Use the Access Point Mode if you wish to use the repeater 4. Enter the default user name “admin” and the default as Wireless Access Point. In this operating mode, the password “admin”. Click on “Ok”. Click on “Access repeater or wireless communication devices is an inter- point“...
- Page 9 Start Start Installation using the WPS key (repeater mode) 7. The 5G and 2.4G signal LEDs show whether or not the connection is fully set up. The quickest, easiest and reliable way to establish a wi- reless connection between the repeater and the WLAN 8.
- Page 10 Start The Web interface The Web interface 4. Click on “Repeater“ to start the assistant. All available wireless 2.4G and 5G access points are listed. The Web interface allows you to configure the repeater 5. Select the access point to which the repeater is to be and to, e.g.
- Page 11 The Web interface The Web interface Assistant Status − Operating time:This shows the operating time since Repeater and Client mode last switch-on 1. First select the Access Point with which the repeater − Mode: The mode selected on the device is shown in is to connect.
- Page 12 The Web interface The Web interface 7. After the restart of the repeater has been completed, − Encoding:Select Deactivate, WEP, WPA PSK, WPA2 PSK, WPA/WPA2 PSK in order to set up an encoding or the the start page of the Web interface appears again. You can now close the Browser.
- Page 13 The Web interface Overview of LED indicators Overview of LED indicators Firmware upgrade If you have received a firmware update this option allows Colour Status Description you to enter the file path to data media from which the current firmware can be installed. Perma- Good reception Manual resetting to default settings...
- Page 14 2 minutes to set up 1999/5/EC R&TTE Directive a connection 2006/95/EC LVDDirective The repeater is switched 2009/125/EG ErPDirective off. supra Elektronik-Vertriebs-GmbH Denisstr. 28A 67663 Kaiserslautern, Germany Perma- Connection set up via nently LAN connection Connection via Flashes LAN connection is active...
- Page 15 Storing Technical specification Storing When not in use please disconnect the WLAN repeater MODEL: MAGINON WLR-510 from the power supply and store it in a clean and dry pla- WLAN standards 802.11 a/b/g/n; ce outside of the reach of children.
- Page 16 Cleaning Disposal Disposal NOTE! Danger from incorrect operation! Dispose of packaging Incorrect use of the WLAN repeater can cause the device to be damaged. For disposal, separate packaging into different − Do not use any aggressive cleaners, types. Cardboard and board must be disposed brushes with metal or nylon bristles or of as paper and foil must be recycled.
- Page 17 00 800 - 78 77 23 68 product to: vement of only commercial agents. MODEL: WLR-510 PRODUCT CODE: 92370 03/2015 Sertronics LTD, Calls are free of charge 45 Regal Drive, if calling from landline.
- Page 18 Warranty card Warranty Conditions Dear Customer! The ALDI warranty offers you extensive benefits compared to the statutory obligation arising from a warrant Warranty period: 3 years from date of purchase.: Costs: Free repair/exchange No transport costs. Hotline: Free hotline. ADVICE: Please contact our service hotline by phone, e-mail or fax before sending in the device.