Overview Of Led Indicators - Supra WLR-510 Instruction Manual

UK IRL
30
Firmware upgrade
If you have received a firmware update this option allows
you to enter the file path to data media from which the
current firmware can be installed.
Manual resetting to default settings
Press Reset button for 20 seconds. The repeater has now
been reset to its default settings and you can carry out
another installation after the restart.
NOTE!
When resetting to the default setting all settings
and network codes are deleted!
The Web interface

Overview of LED indicators

Overview of LED indicators
LED Colour Status
Perma-
nently
on
2.4 G signal
LED
Green
Flashes
and
5 G signal LED
Off
Flashes
WLAN Green
Off
UK IRL
31
Description
Good reception
(signal strength 100 –
50%)
Normal reception:
Slow flashing
50 - 25%
Weak reception:
Rapid flashing (< 25%)
No reception:
Data are transmitted
The wireless network is
switched off or the LED Off
mode was set.