Assistant; Repeater And Client Mode; Access Point Mode - Supra WLR-510 Instruction Manual

UK IRL
26
Status
− Operating time:This shows the operating time since
last switch-on
− Mode: The mode selected on the device is shown in
the top let corner: Repeater, Access Point or Client.
The information displayed is identical in all three
operating modes.
Wi-Fi information (2.4G / 5G)
− ESSID: This shows the SSID of the WLAN network used
by the WLAN repeater .
− Channel: This shows the channel on which the WLAN
repeater transmits.
− Status: This shows whether the 2.4G or 5G wireless
adapter is connected to the network.
LAN
− IP: This shows the IP address of the WLAN repeater.
− MAC: This shows the IP address of the LAN adapter of
the repeater.
The Web interface The Web interface

Assistant

Repeater and Client mode

1. First select the Access Point with which the repeater
is to connect.
2. Next, enter the network key for the selected Access
Point.
3. The repeater mode can be set in the next window.
Click on option "Accept" to complete the process. The
data are saved and the repeater is restarted.
4. After the restart of the repeater has been completed,
the start page of the Web interface appears again.
You can now close the Browser.

Access Point Mode

1. First select a SSID for the 2G or 5G Access Point.
2. Next determine the security settings for the 2.4G and
then for the 5G Access Point
3. Select the desired method from option "Encoding".
4. Depending on the selected encoding method further
entry and selection options appear on the screen.
5. Close Settings by clicking on the "Continue" button.
6. Check the selected settings again and click on option
"Accept" to complete the process. The data are saved
and the repeater is restarted.
UK IRL
27