Lionel C&NW WINDY CITY GP-38 Owner's Manual page 6

Running your train
Operating the RailSounds sound system
W
hen you power up the locomotive on the track, you will hear the sounds of the idling
diesel motor. As you increase speed, the RPM sounds will ramp up through eight levels.
Horn
Press the HORN button on your transformer to sound the horn. The sound will play for as long
as you hold the button.
Bell
Press the BELL button on your transformer to activate the bell sound. Press BELL again to dis-
continue the sound.
Crew dialog
Crew dialogue can be activated when the locomotive is sitting at idle with power on nd also
when in motion.
Crew dialogue can be triggered by a short (1 second or less) horn blast. Press the HORN button
on your transformer and as soon as you hear the horn begin to play immediately release the
HORN button. The dialogue below is activated based upon the listed criteria.
The locomotive must be powered up on the track for the dialog to play. Do not turn
Note!
off track power
Press the HORN button Diaglogue
"Please stand by";
Engine recently stopped (less than 15 seconds).
"Good to go"; Engine stopped (more than 15 seconds).
"Train in motion"; Engine moving (less than 7 seconds).
"Clear ahead" Engine moving (longer than 7 seconds).
"Caution Speed"; (Bell must be ringing, engine must
be in motion).
6