Setting The Signal; Cleaning And Maintenance; Machine Housing/Control Panel - Siemens WM14E462GB series Instruction Manual And Installation Instructions

M

Setting the signal

S e t t i n g t h e s i g n a l
1. Activate the setting mode for the signal volume
Set to $
2. Set the volume for the button signals and information signals (depending on the model)
* You may need to select
the function several
times.
2
Cleaning and
maintenance
:
Warning
C l e a n i n g a n d m a i n t e n a n c e
Risk of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and unplug the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
One step, the display
panel lights up
Set the vol- Skip
ume*
Select and hold
One step Set the volume*
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
Wipe the housing and the control
■
panel with a soft, damp cloth.
Do not use any abrasive cloths,
■
scourers or cleaning agents
(stainless steel cleaners).
Remove the detergent residue
■
immediately.
Setting the signal
One step, release
Set to $
en
21