Furuno RC-1800T Operator's Manual page 26

SPECIFICATIONS OF THE AC/DC CHANGE-OVER UNIT
1. BATTERY CHARGER (BC-6158)
(1) Applicable Battery
(2) Power Source
(3) Output for Battery
(4) Charge/discharge Meter
(5) Control Panel
2. RECTIFIER (PR-850AR)
(1) Power Source
(2) Input Current
(3) Output Voltage
(4) Peak Output Current
(5) Ripple Voltage
(6) Insulation Resistance
3. RECTIFIER (PR-300)
(1) Power Source
(2) Input Current
(3) Output Voltage
(4) Peak Output Current
(5) Ripple Voltage
(7) Insulation Resistance
(RADIO SWITCH BOX)
200AH Normal ship battery
100/110/200/220 VAC, 1 phase, 50/60 Hz
28 VDC, 30 A nominal
built in the radio console panel
built in the radio console
100/110/120/200/220/240 VAC, 1 phase, 50/60 Hz or
24 VDC
15 A or less (100VAC input, 30 A output)
30 A or less (100VAC input, 60 A output)
24 V DC ±10%, 30 A
60 A (within 1 min at AC supply)
40 A (within 1 min at DC supply)
200 mVp-p or less
500 VDC, 10 MΩ or more between AC input and chassis
100/110/200/220 VAC, 1 phase, 50-60 Hz or 24 VDC
4.1 A or less (100VAC input), 7.5 A or less (DC input)
24 VDC ±10%, 7.5 A
20 A (with rated output current: 15 A, 250 msec, duty 50 %)
100 mVp-p or less
500 VDC, 50 MΩ or more between AC input and chassis
SP - 8 E5632S01D