Replacement Of The Parts - Furuno RC-1800T Operator's Manual

6. Pull the paper bail forward. Manually feed the paper over the paper guide bar and under
the platen. Turn the platen knob clockwise to feed the paper so it reaches the paper
guide bar.
7. Unlock the paper release lever to adjust the paper and then lock it.
8. Slide the left and right guide rings to position the paper straightly.
9. Replace the paper cover, the printer cover and roll paper stay

2.4 Replacement of the Parts

The parts shown below should be replaced before the expected expiration date. The period
of expiration begins from the date of installation. Record the date of replacement. For
replacement, request service.
Part
Distributor PCB
2-8
Platen
Guide Ring
Remarks on Replacement of Ribbon Cassette
Change the ribbon when print darkness is no longer suitable to your
needs.
Part
Ribbon Cassette
The print head is hot after printing. Allow it cool before touching it.
Type
05P0606(LF)
Paper Guide Bar
Paper Release Lever
Platen Knob
.
Type
Code No.
000-133-029
SP-16051NB
Code No.
001-046-600 4.1 years
Paper Bail
Guide Ring
Life