Furuno RC-1800T Operator's Manual page 22

SPECIFICATIONS OF THE DSC/WATCH RECEIVER DSC-60
1. DSC TERMINAL
(1) Line out
(2) Line in
(3) Frequency shift
(4) Baud rate
Protocol
(5)
2. DSC WATCH KEEPING RECEIVER
(1) Receiving Frequency
For MF spec:
For MF/HF spec:
(2) Class of Emission
(3) Frequency Stability
(4) Intermediate Frequency
(5) Selectivity
(6) RF Input Impedance
(7) Receiving Sensitivity
(8) Warming-up Time
3. GENERAL WATCH KEEPING RECEIVER (OPTION)
(1) Receiving Frequency
(2) Class of Emission
(3) Frequency Stability
(4) Intermediate Frequency
(5) Selectivity:
(6) RF Input Impedance:
(7) Receiving Sensitivity:
(8) Warming-up Time:
0 dBm (adjustable between -12dBm and +12dBm),
600 ohms, balanced
-30 to +10 dBm, 600 ohms, balanced
Mark: 1615 Hz, Space: 1785 Hz
100 baud's ± 30 x 10
Complies with ITU-R Rec.493-9, 541-8, 1082-1
2187.5 kHz
2187.5 kHz, 4207.5 kHz, 6312 kHz, 8414.5 kHz,
12577 kHz and 16804.5 kHz
F1B, J2B
within ±10 Hz
1st: 54455 kHz, 2nd: 455 kHz
-6 dB: 270 Hz or more
-30 dB: within ±380Hz
-60 dB: within ±550Hz
50 ohms
Better than 0 dBµ (at error rate within 1%)
1 minute (oven 30 minutes)
1.6 MHz to 27.5 MHz
F1B, J2B
within ±10Hz
1st: 54455 kHz, 2nd: 455 kHz
-6 dB: 270 or more
-30 dB: within ±380Hz
-60 dB: within ±550Hz
50 ohms
Better than 0 dBµ (at error rate within 1%)
1 minute (oven 30 minutes)
SP - 4
-6
E5632S01D