Furuno RC-1800T Operator's Manual page 20

SPECIFICATIONS OF THE SSB RADIOTELEPHONE FS-5000
1. GENERAL
(1) Communication System
(2) Frequency Range
(3) Class of Emission
(4) Number of Channels
(5) Power Supply
2. TRANSMITTER
(1) Frequency Range
(2) RF Output Power
(3) Power Reduction
(4) Frequency Stability
(5) Modulation AF Response
(6) Keying Speed
(7) AF Input
(8) Line Input
(9) Tone Frequency
3. RECEIVER
(1) Receiving System
(2) Frequency Range
(3) Sensitivity
(4) Selectivity
(5) Spurious Response
(6) Intermodulation
Full-duplex, Semi-duplex or simplex
Transmit: 1.6065 MHz to 29.9999 MHz (100 Hz steps)
Receive: 0.1 MHz to 29.99999 MHz (10 Hz steps)
J3E, J3C (for intership facsimile),
H2B (for selective calling),
H3E/A3E (reception only),
F1B = J2B (for DSC, NBDP terminal),
F3C (for weather facsimile, reception only)
User channel: 400
ITU SSB/TELEX channels
2182 kHz (single action)
24 VDC: 3 A (reception), 60 A (transmission) max.
1.6065 MHz to 29.9999 MHz (100Hz steps)
400 Wpep at 50 ohms load
60 W
±10 Hz
350 Hz to 2700 Hz within 6 dB
CW: 25 bauds, Telex: 100 bauds
-46 dBm/600 ohms
0 dBm/600 ohms
1500 Hz
Double-conversion superheterodyne
10kHz 29.99999MHz (10 Hz steps)
Input level to produce SINAD 20dB, Unit: dBµV
Frequency Range (MHz)
0.1 to 0.3
0.3 to 1.6
1.6 to 4
4 to 30
0.1 to 4 MHz: at 10 ohms + 250 pF, 4 to 30 MHz: at 50 ohms
J3E: 2.4 kHz at –6 dB
H3E: 6 kHz at –6 dB
F1B: 0.3 kHz at –6 dB
Better than 90 dB
Better than 94 dB
SP – 2
J3E H3E
+40 +54
+25 +39
+15 +29
+3
F1B
+6
-7
E5632S02D