Table of Contents
Advertisement
GENERAL OPERATION (CONT.)
This function is used for maintaining a program being listened to during a trip if its
frequency changes.
- TA ON/OFF: Enables or disables the TA function (traffic information). When this
function is enabled, the tuner will periodically scan received frequencies and play
any traffic information message that may be broadcast.
-
TA VOL (traffic announcement volume): This function allows you to define the
minimum volume for the traffic announcements. The adjustable range is 0~43.
The defaulted value is 26. Rotate the
announcements.
- REG ON/OFF:
Some broadcasting stations change their program from normal broadcasting to
regional broadcasting for a certain time period. When region is on, the current
listening program remains unchanged. When region is off, it allows the reception
moved to the regional station.
- EON ON/OFF:
• Rotate the
VOL
knob on the front panel or press the
control to adjust the selected item.
Set the Clock (CLK)
1. To display clock time, press the
2. To set clock time, press and hold the
3. Press the
or
4. Press the
CLK
button and the minutes will flash.
5. Press the
or
6. Note: During Bluetooth mode, the clock can not be adjusted.
Change the Source (SRC)
Press the
SRC
button to switch between RADIO, BT(Bluetooth), DISC(with a CD/MP3 disc
inside the disc slot), USB(with USB device inserted), CARD(with Micro SD card inserted) and
AUX-IN(auxiliary input) modes.
Mute on/off
In power on mode, briefly press the
will be also released when the volume knob is used.
USB port
The USB port of this car radio is designed for media playback from flash memory devices.
Note: This USB port is not designed to charge high-power devices.
Built-in Microphone
To receive your voice when you calling by using this bluetooth handsfree system.
Aux input connector
The 3.5mm auxiliary input stereo connection is designed for deiveces with 3.5mm line-out or
headphone output.
Reset System (RESET)
The RESET button is used to reset all parameters to factory default settings.
This function may be used when the LCD does not display normally or sound is distorted, or
when any of the controls are disabled. To reset your system, use a thin object with a pointed
end to press the
RESET
6
Enables or disables
Enables or disables
CLK
button.
CLK
button on the front panel or on the remote control to adjust the hour.
button on the front panel or on the remote control to adjust the minute.
MUTE
button .
VOL
knob to adjust the volume of the traffic
the region mode.
the EON (Enhanced other network).
VOL+
button and the hour will flash.
button to toggle mute on or off.
/
VOL-
button on the remote
The muted state
Advertisement
Table of Contents
