Your Machine Is Equipped With A "Standby Mode; Restoring The Factory Settings - Grundig GWN 59450 CW User Manual

Operating the product

Restoring the factory settings

When the factory settings are restored:
ĥ Display language will return to the first
language you selected when you have
operated your machine for the first time:
Brightness is set to maximum level,
ĥ
Volume level is set to "High",
ĥ
Press and hold the Soiling Level Adjustment
ƒ1
button for 3 seconds to enter the Settings
menu. 1. Open the "Factory Settings" menu
by pressing 1 and 3
st
buttons.
Press the 2 auxiliary function button to
ƒ2
nd
reset to Factory Settings.
44 / EN
auxiliary function
rd
Factory Settings?
SETTINGS BRIGHTNESS
Press either 1 or 3
ƒ3
st
button to confirm to the Factory Settings.
"Save setting?" will be displayed.
Settings will be saved once the second
ƒ4
auxiliary function button is pressed.
5.22 Your machine is equipped
with a "Standby Mode"
In case of not starting any programme or
waiting without making any other operation
when the machine is turned on by On/Off
button and while it is in selection step or if no
other operation is performed approximately
2 minutes after the programme you selected
has come to an end, your machine will
automatically switch to energy saving mode.
Brightness of indicator lights will decrease.
Also, if your product is equipped with a
display showing the programme duration,
this display will completely turn off. In case
of rotating the Programme Selection knob
or pressing any button, lights and display
will restore to their previous condition. Your
selections made while exiting the energy
saving mode may change. Check the
appropriateness of your selections before
starting the programme. Readjust if necessary.
This is not a fault.
Washing Machine / User's Manual
Auxiliary Function
rd
Store Settings?
SETTINGS BRIGHTNESS