Windows Nt 3.5 & Windows Nt 3.51; Installation - Asus agp-v1326 User Manual

64-bit agp video card

Table of Contents

2. Windows NT 3.5 & Windows NT 3.51

1. Start Windows NT, switch display properties to VGA mode (16 colors, 640 x

480 pixels), then restart your computer to make the change.

2. After your computer restarts, right-click the desktop and click Properties.

3. Click the Settings tab.

4. Select Change Display Type.

5. Select Adapter Type and click Change.

6. Click Have Disk.

7. Insert the ASUS AGP-V1326 Installation CD.

8. Type D:\WINNT\WINNT35 (assuming your CD-ROM disc drive is in drive

D) or click Browse to select the path of the display driver for Windows NT.

Click OK.

9. You will see a list of ASUS AGP-V1326 drivers. Select ASUS AGP-V1326 and

then click OK.

10. Windows NT will once again prompt for confirmation. All appropriate files are

then copied to the hard disk. When all files are copied, go back to the Display

Properties box by clicking Close. Click Apply.

11. The System Settings Change dialog box is displayed. Click Yes to restart Win-

dows.

12. Windows NT will restart with the default settings. The Display applet will ap-

pear to allow for mode selection.

V. Windows NT

ASUS AGP-V1326 User's Manual

Table of Contents

Agp-v1326c