Skoda Rapid Spaceback Owner's Manual page 85

 Air flow in the footwell
 Air flow to the windows and the footwell
Switch recirculation on/off » page 84

Switch the cooling system on/off

Information on the cooling system
After pressing the button  » Fig.
up, even if not all the conditions for the cooling system have been met. The
cooling system starts to work as soon as the following conditions have been
met » page 82.
Note
To ensure adequate thermal comfort, during operation of the manual air condi-
tioning there could be an increase in the engine idle speed in some circum-
stances.
Climatronic (automatic air conditioning)
Fig. 102 Controls the Climatronic

Read and observe on page 82 first.
Individual functions can be set or switched on by turning the dial or pressing
the corresponding button » Fig. 102.
Setting temperature
1
▶
Reduce the temperature /

Selected temperature
2
Degrees Celsius or Fahrenheit
3
Automatic operation of the air conditioning system is switched on
4
Intensive air flow to the windscreen switched on
5
Direction of air flow
6
101, the warning light on the button lights
increase the temperature

Recirculated air mode activated
7
Cooling system activated
8
Set blower speed
9
Set the blower speed (the set blower speed is indicated by the corre-
10
sponding number of segments in the display)
▶
Turn to the left: Decrease speed / switch off Climatronic
▶
Turn to the right: Increase speed
Interior temperature sensor
11
Switching on/off the intensive windscreen air flow - when this function

is switched on, the warning light illuminates in the button
Switching on automatic mode

Switching the airflow to the windows on and off

Switching the airflow to the upper body on and off

Switching the airflow to the footwell on and off

Switch recirculation on/off » page 84

Switch the cooling system on/off

When this function is switched on, the corresponding icon appears in the dis-
play.
After the cooling system is switched off, only the ventilation function remains
active, whereby the lowest temperature that can be reached is the outside
temperature.
Setting temperature
In the range between 16 °C to 29 °C, an automatic temperature control takes
place.
At a temperature setting below 16 ° C,  lights up in the temperature display,
the Climatronic functions with maximum cooling performance.
At a temperature setting above 29 °C,  lights up in the temperature display,
the Climatronic functions with maximum heating output.
Switching between Celsius and Fahrenheit
Press the  and  buttons simultaneously and hold for about 2 s, the dis-
play shows the desired unit (position
CAUTION
Do not cover the interior temperature sensor
Climatronic could be affected.
» page 84
» Fig. 102).
3
» Fig. 102 - the function of the
11
Heating and ventilation

83