Front Assist - Skoda Rapid Spaceback Owner's Manual

Table of Contents

Advertisement

Fig. 127 Segment display: examples of speed limiter status displays
Read and observe
on page 104 first.
Status displays of the speed
limiter» Fig.
Speed limit set, but regulation is inactive.
Control is active.
No speed limit set.
System fault - seek assistance from a specialist garage immediately.
Basic requirements for start of control
The speed limiter is activated.
The current speed is higher than 30 km/h.
Description of operation
Read and observe
on page 104 first.
Overview of the control elements of the speed limiter
Activate CCS (required condition for the subsequent activation of
A

the speed limiter)
126,
» Fig. 127
Fig. 128
Operating elements of the speed
limiter
» Fig. 128
To activate the speed limiter, set the switch to position , then
press
to operate.
D
Interrupt control (sprung position)

Disable speed limiter (set limit delete)

Take control again
/ increase speed - press (in increments of 1
B

a)
km/h), hold (in increments of 10 km/h)
Start regulation / reduce speed - press (in increments of 1 km/h),
C

hold (in increments of 10 km/h)
Switching between CCS and speed limiter
D

a)
If no speed limit is set, the current speed is set as the speed limit.
After starting the system, the current speed is set as the speed limit, the
warning light
lights up in the instrument cluster.
Exceeding the speed limit during the regulation
If, during the control, it is necessary to exceed the speed limit (e.g. to over-
take), the accelerator pedal must be pressed fully.
When exceeding the speed limit (e.g. driving down a hill), an acoustic signal
sounds and the warning light
The regulation is resumed once the speed has fallen below the set limit.
Note
By pressing the button
during the regulation, this is cancelled and the CCS
D
is activated.

Front Assist

Introduction
This chapter contains information on the following subjects:
Radar sensor
Operation
Distance warning
Warning and automatic braking
Deactivation/activation
Malfunctions
flashes in the instrument cluster.
Assist systems
106
106
107
107
108
108
105

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rapid

Table of Contents