Changing light bulbs for fog lights
Fig. 195 Remove the number plate light / replace the bulb
Read and observe
and
Remove the protective grille and headlight
›
Insert the clamps for removing the full wheel trims into opening
›
Pull the hook in the direction of arrow
the direction of arrow
» Fig.
2
›
Unscrew the screws
with the screwdriver from the tool kit.
B
›
With the key
» page
141, Vehicle tool kit, unlock the locking
2
of arrow
.
3
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Turn the socket with the bulb to the stop in the direction of the arrow
›
Remove the socket with the bulb in the direction of arrow
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
7
›
Attach the connector.
on page 156 first.
to remove the protective grille in
1
195.
C
.
4
.
5
.
6
.
8
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 195
and tightening.
›
Insert the guard and push it gently until it locks into place.
Changing the bulb for the licence plate light
Fig. 196 Remove / replace the bulb for the number plate light
Read and observe
›
Push the light in the direction of arrow
›
Swivel out the lamp in the direction of the arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder.
›
Reinsert the lamp in the opposite direction to the arrow
›
Push on the light until the spring clicks into place.
» Fig.
195.
A
in direction
.
7
and
on page 156 first.
» Fig. 196
until it comes loose.
1
and remove it.
2
Fuses and light bulbs
4
.
3
.
1
159