Help And Advice; Ignition - Lighting The Fire; Fuel Effect - Coal Bed; The Rear Wall Effect - Wonderfire 955 Installer And Owner Manual

Ignition - Lighting the fire.

When turning the control knob to ignite the fire ensure that it is turned SLOWLY.
Turning the control knob quickly does not allow enough gas flow to light the pilot or
burner.

Fuel effect - Coal bed.

The fuel effect will lighten in colour with use and the areas where flames touch may
develop brown edges. This is normal and is no cause for concern.
Does your fire have any signs of the following?
1. The fuel effect has areas that are black in colour (Much darker than the
surrounding areas).
2. The fuel effect has areas that are black in colour and the flames are unusually long
and dark yellow / orange.
3. Black dust / black particles on the hearth at the base of the fire.
Any of the above can be signs of soot forming in the fire. Please remember that we
recommend the fire be serviced annually (Once a year) by a Gas Safe Register
engineer (Corgi or Gas Safe Register outside of the UK). If your fire is over 12
months old we strongly recommend that it is serviced.

The rear wall effect.

The rear wall is made from the same material as the fuel effect. As with the fuel
effect, the rear wall will lighten in colour with use and the areas where flames touch
may develop brown edges.
To maintain the high performance and quality finish of your appliance, please follow
these guidelines:
Before attempting to clean the fire, please remember to turn off the fire and wait
for the appliance to cool completely. The fire will retain heat for some time before
cleaning can begin.
If any pieces of debris are found in the firebox, have the chimney inspected before
further use.

Metal parts.

Clean the metal parts with a slightly damp, lint free non-abrasive cloth and then
dry.
Do not use abrasive cleaners, as these will scratch the fire surface.
©
Baxi Heating U.K. Limited 2010.
OWNER GUIDE

HELP AND ADVICE

CLEANING YOUR FIRE

Page 42