Panasonic PT-RZ31K Operating Instructions Manual page 29

11 Remote control signal receiver (rear)
12 Air exhaust port
13 Control panel (x page 30)
14 Connecting terminals (x page 31)
Top
1
Projection direction
WARNING
Do not touch the top surface of the projector during use.
f Doing so may result in burns, as the top surface is hot during
use and for a while after use.
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
Chapter 1 Preparation — About your projector
15 Security slot
This security slot is compatible with the Kensington security
cables.
16 <AC IN> terminal
Connect the supplied power cord.
17 <MAIN POWER> switch
Turns on/off the main power.
Bottom
2
2
1 Screw holes for eyebolts
Screw diameter: M10, tapping depth inside the projector:
35 mm (1-3/8")
2 Handle
Hold the handle with your hand when carrying the projector.
3 Screw holes to fix the projector
Screw diameter: M10, tapping depth inside the projector:
30 mm (1-3/16")
3
ENGLISH - 29