Advertisement
INSTALLER AND OWNER GUIDE
similarly qualified person (See the last page of this guide for useful telephone numbers).
All external wiring between the heater and the electrical supply shall comply with
current IEE regulations.
Removing the fascia on models fitted with a traditional fascia.
1. Remove the two fascia securing screws (See figure 2). Remove the front fascia by
gently pulling the base of the fascia forward whilst lifting clear of the support brackets
at the top of the heater (See figure 2).
2. Keep the fascia in a safe place while installing the heater.
Heater Fixing
All of the fixings supplied with the heater have been identified as in figure 3.
Figure 3. Loose parts identification
The heater must be fixed into position to prevent it from being tipped over
The following fixing options are available:
Screw Fixing
Wire Fixing
Spacer Frame (The spacer frame may not be supplied with the heater - see details
in section headed '
If fitting the heater into a fireplace or surround opening, try the heater in the opening to
ensure that it will fit.
If fitting the heater onto a decorative hearth surface such as marble or tile it is advisable
to protect the hearth surface. Do not drag the heater across the surface of the hearth as
this may scratch the hearth surface.
Where can I fit the heater?'
.
)
Page 7
Advertisement
