Advertisement
INSTALLER AND OWNER GUIDE
Always
Always install the heater in accordance with this guide. If in doubt obtain
!
expert advice.
Always make sure the electrical socket is accessible and located adjacent to, but
!
not above the heater.
Always disconnect the heater from the electrical supply before carrying out
!
cleaning, maintenance or replacing the light bulbs.
Always make sure the heater is firmly secured to prevent it from being tipped over.
!
Always use a fireguard when young children and infirm persons can come into
!
contact with the heater.
Always use genuine Baxi Fires Division spares.
!
Never
Never leave children unsupervised in a room where the heater is ON and
!
unguarded.
Never obstruct or cover the fan outlet or force items into heater openings.
!
Never install or use the heater anywhere where water is in use, i.e.
!
Bathrooms, Kitchens, Shower Rooms, Swimming Pools etc.
Never use aerosols or steam cleaners on or around the heater.
!
Never route the mains supply cable under carpet etc.
!
Never install the heater close to curtains or combustible materials.
!
Never use the heater to dry clothes etc.
!
Never sit or stand on the heater.
!
The installation of this heater requires a reasonable level of DIY skills.
Please read this guide thoroughly before commencing installation and if in doubt,
seek help from a competent person
Do I need any tools?
1. Depending on which style of fascia you have (traditional / contemporary) you will
need the below screwdrivers: -
1 off Pozidrive / Phillips / cross head screwdriver. This is required on traditional
models. This should have a number 2 size end. If you are unsure about the size of the
SAFETY
FITTING THE HEATER
Page 4
Advertisement
