Decimal Point And Separator; Initializing The Calculator; Basic Calculations; Arithmetic Operations - HP 10s+ User Manual

Decimal Point and Separator

The display setting (Disp) screen is used to specify
the required decimal mark and the character to use
before groups of three digits.
• To change these settings, press
until the settings screen appears.
• Press  
• Press the number key (
to the setting you want:
 (Dot): Decimal point and comma separator
(Comma): Decimal comma and point separator


Initializing the Calculator

• To initialize the calculator (which clears the memory
and all variables, and resets all modes to their
default settings) press:

Basic Calculations

Arithmetic Operations

To perform a basic calculation, select COMP mode
by pressing
COMP............................................................
• When raising negative values to powers, make
sure that the negative sign is inside the
parentheses around the value. Please see the
section "Sequence of Operations" on page 33 for
more information.
Disp
1
to display the settings screen.
.


 or  ) corresponding
  
8
repeatedly
(ALL) 
 