Dispensing Steam - Saeco A MODO MIO premium Operating Instructions Manual

EN
USING THE STEAM / HOT WATER WAND
Danger of scalding! Dispensing may be preceded
by short spurts of hot water and scalding is pos-
sible. The steam/hot water wand may reach high
temperatures. Do not touch it with bare hands.
DISPENSING HOT WATER
Place an empty container under the steam / hot
1
water wand and open the knob.
EXTRA: press the brew button. Hot water will be
2
dispensed.
PREMIUM: press the manual brew button. Hot wa-
ter will be dispensed.
EXTRA PREMIUM
EXTRA: press the brew button again to stop
3
dispensing and close the steam/hot water
knob.
PREMIUM: press the manual brew button again to
stop dispensing and close the steam/hot water
knob.
PREMIUM:
with this procedure you can dispense up
to 6 oz. of water.

DISPENSING STEAM

EXTRA: press the steam button and keep it
1
pressed. The indicator lights turn off. When the
steam light is steadily illuminated, release the
button.
PREMIUM: press the steam button and keep it
pressed. The steam light will start blinking. When
the steam light is steadily illuminated, release
the button.
EXTRA PREMIUM
Place an empty container under the steam/hot
2
water wand. Open the steam knob for a few sec-
onds to purge the wand of any residual water.
When steady steam comes out, close the knob
and remove the container.
Fill 1/3 of a container with cold milk. Immerse
3
the steam wand into the milk and open the
steam knob. Froth the milk by gently swirling
the container.
Once the desired result has been achieved, close
4
the knob and remove the container.
Only for the PREMIUM model, press the steam button
again. Three lights will blink on the machine..
We suggest using partially skimmed milk, at refrig-
erator temperature, in the desired quantity to ob-
tain a thick froth.
-