Table of Contents
Advertisement
Using the Timers
Using the Sleep Timer
MENU
>
System
>
Time
This function automatically shuts off the TV after a preconfigured period of time. Select
Time
>
Sleep
Timer. You can set the timer up to 180 minutes in 30-minute increments.
Turning On the TV using On Timer
MENU
>
System
>
Time
Set the
On Timer
so that the TV turns on automatically at a chosen time. You can set up three
separate
On Timer
configurations concurrently:
Timer is only available if the
●
Setup
Select Off, Everyday, Mon~Fri, Sat~Sun, or Manual. If you select Manual, you can select the
days you want the
button.
●
Time
Set the time that the TV turns on automatically. See
setting instructions.
●
Volume
Specify the volume the TV will set itself to when it turns on.
●
Source
Select a signal source from the list. This is the source the TV will access when it turns on. If you
want to use a USB device, that USB device must be connected to the TV before you start the On
Timer set up. To play back media from an HDMI or Component source such as a DVD player, Blu-
ray player, or set-top-box, you must leave the device on. It must be on and playing when the TV
turns on.
●
Antenna
If you have set the
●
Channel
If you have set the
●
Music
/
Photo
If you have set the
music field and/or a folder containing photos in the photo field. If you select a folder that
contains music files and a folder that contains photo files, the TV plays the music files and
displays the photos at the same time.
>
Sleep Timer
Try Now
>
On Timer
Try Now
Clock
has been set.
On Timer
to turn on the TV by highlighting each day, and then press the
Source
to TV, select a broadcast signal source,
Source
to TV, select a channel.
Source
to USB, specify a USB device folder containing music files in the
On Timer
1,
On Timer
Manual
under Setting the Time for time
System
2, and
On Timer
3. The On
Air
or Cable.
>
E
Advertisement
Table of Contents
Troubleshooting
