Enabling Digital Audio Output; Resetting All Sound Settings - Samsung UN40J5300AG E-Manual

Enabling Digital Audio Output

MENU > Sound > Additional Settings
This Smart TV is SPDIF-enabled. The Sony Philips Digital Interface (SPDIF) provides digital audio
output to speakers and various digital devices, including A/V Receivers and home theaters.
●
DTV Audio Level
"
Availability depends on the specific area.
(Digital channels only)
The TV cannot freely control the volume of the digital audio that it sends to the AV receiver. Use
this to set the digital audio volume at a comfortable level.
"
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
"
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
●
Audio Format
Selects the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF)
formats may vary depending on the input source.
●
Audio Delay
Try Now
This setting helps correct timing mismatches between the audio and video tracks when you are
watching TV and listening to audio through a digital audio device. Enabling the feature displays a
slide bar that you can use to adjust the delay by up to 250ms.
●
Dolby Digital Comp
"
Availability depends on the specific area.
Some digital TV progams provide 5.1-channel Dolby audio. This TV converts Dolby audio to
stereo audio so that it can play the sound through the TV's speakers. There are two methods to
choose from. RF
●
Auto Volume
Try Now
Because each station has its own set of broadcasting conditions, the volume may fluctuate as
the channel changes. The
by lowering or raising the sound output.
whereas Night
viewing. To use the volume control of a connected source device, deactivate the
function. When using the
may not function properly.

Resetting All Sound Settings

MENU > Sound > Reset Sound
Use to reset all sound settings to the factory defaults.
Try Now
Try Now
is for better sound at lower volumes, and
Auto Volume
applies a slightly lower volume level than
Auto Volume
Try Now
Line
function automatically adjusts the volume of a channel
Normal applies a normal level of volume adjustment,
Normal
function with a source device, the device's volume control
is for higher volumes.
and is ideal for nighttime TV
Auto Volume