Adjusting The Picture Quality For Each Picture Mode - Samsung UN40J5300AG E-Manual

Adjusting the Picture Quality for Each Picture Mode

MENU > Picture
Select one of the settings below from the
setting. Adjust the value by pressing the
setting by pressing the
mode.
"
The Color and Tint (G/R)
to DVI cable.
Choose a Picture Mode
●
Backlight
Try Now
Adjusts the brightness of individual pixels. Decreasing the brightness reduces power
consumption.
●
Contrast
Try Now
Adjusts the screen contrast.
●
Brightness
Try Now
Adjusts the overall brightness.
●
Sharpness
Try Now
Sharpens or dulls the edges of objects.
●
Color Try Now
Adjusts the overall color saturation.
●
Tint (G/R)
Try Now
Adjusts the ratio of green to red. Increase the green value to saturate the greens and the red
value to saturate the reds.
"
Adjusted values are saved by the TV for the current source and picture mode, and remain in effect each
time the source and picture mode is selected. Consequently, the TV can have different picture settings for
each external source.
Applying the Current Picture Settings to Other Input Sources
MENU > Picture > Apply Picture Mode
You can apply the picture quality setting that you configured for the TV to all external devices
connected to the TV or to the current source only.
To apply the setting to all external devices connected to the TV, select
setting to the current input only, select
Picture
l
u d
or button. Adjusted values are applied to the current source and picture
settings cannot be adjusted when the TV is connected to a computer via an HDMI
- Dynamic, Standard, Natural, Movie - and then adjust the settings.
Try Now
Current
menu to display the slide bar for the selected
r
or arrow button on your remote. Choose a different
Source.
All Sources. To apply the