Bell OH-58A Technical Manual page 30

TM 55-1520-228-BD
GENERAL INFORMATION
WRITTEN INSTRUCTIONS
See me - print name &
rank. (Signature)
Names of parts to
be repaired, (item,
skin, stringer.
Full
Partial
OK
?
Instruction markings for system are in two parts:
(1) Repair instruction markings and meanings are shown on this sheet and are
used to indicate repair actions required.
(2) System Identification - When known, identify the system using markings
shown on sheet 3 of this figure.
MARKINGS
Fix
Cap
Repl
OK
Tag
Figure 1-3.
1-10
See assessor or whoever has signed written instructions
for additional information.
Where compound damage occurs, the names or abbreviations
of specific items can be written adjacent to the damage
to clarify repair instructions.
A full strength repair is required.
Partial strength repair required in accordance with
specific aircraft BDAR manual.
No repairs required - damage is within acceptable limits
for battle conditions.
Continual assessment or reinspection is required after
each sortie.
Repair the damaged system in accordance with approved
standard BDAR techniques for type of system, item,
high pressure, low pressure, etc.
Terminate or block the system to prevent leakage.
Replace damaged part - repairs not acceptable.
No repairs required.
Repair instructions are written on tags tied to indivi-
dual damaged lines/components.
Damage Assessment Markings (Sheet 2 of 3)
MEANING
MEANING