Table of Contents
Advertisement
BDAR FIXES SHALL BE USED ONLY IN COMBAT OR FOR TRAINING
(AUTHORIZED TRAINING FIXES ARE LISTED IN APPENDIX E.)
IN EITHER CASE, DAMAGES SHALL BE REPAIRED BY STANDARD
F-1.
SCOPE. This appendix lists and
depicts the major components, cable
routes, and wiring terminations per-
taining to the OH-58 series helicopter
avionics. This information is fur-
nished as an aid to expedient repair
techniques described in Chapter 11.
F-2. GENERAL. The actual configura-
tions may vary depending on particular
requirements or changes incorporated
through modification work order (MWO)
action and special purpose alterations.
APPENDIX F
AVIONICS CONFIGURATIONS
AT THE DISCRETION OF THE COMMANDER.
PROCEDURES AS SOON AS PRACTICABLE.
Section I. INTRODUCTION
The Figures F-1 thru F-10 show typical
components in relation to the helicopter,
and lists the component part number.
Each figure also has a table associated
with the avionics system which contains
a complete wire listing to be used as
an aid in rapid wire splicing. This
not shielded, or pair twisted with
shield), end connectors, and the pin
numbers on each connector.
location of avionics and their associated
includes the wire number, type (shielded,
TM 55-1520-228-BD
F-1
Hide quick links:
Advertisement
Table of Contents
