5 - 30 DS3578 With FIPS Digital Scanner Product Reference Guide
Multicode Mode (DS3578-SR / DS3578-HD)
Parameter # F1h A5h
Enable this parameter to allow multiple bar codes to decode upon one trigger event based on the programmed
multicode expression. The digital scanner reports a successful decode and provides user indication only if it
decodes all bar codes indicated by the multicode expression, otherwise the decode fails. Bar codes are transmitted
in the order defined in the multicode expression. Disable this to operate in normal decode mode.
NOTE The DS3578-DP and DS3578-ER configurations do not support Multicode Mode.
When using this mode, disable
the same distance and angle (perpendicular).
*
Disable Multicode Mode
Continuous Bar Code Read on page
(00h)
5-21, and always orient the digital scanner at
Enable Multicode Mode
(01h)