West Bend 56911 Instruction Manual page 5

place and properly positioned on the carafe during the brew process or hot water
or hot coffee may overflow.
7. Press "On/Off" to begin brewing. The blue indicator light will illuminate indicating
that the brewing process has begun. Note: As long as the blue indicator light is
illuminated, the coffee will be kept warm. If the carafe is removed before the end
of the brew cycle, it must be returned promptly to the warming plate so the coffee
may continue to brew and to avoid hot water or hot coffee overflow.
8. When less than one cup of coffee remains in the carafe, or to turn the
coffeemaker and warming plate off, press "On/Off" again to turn the appliance off.
If the "DELAY" or "STEEP" buttons were selected, they will remain illuminated,
even after the coffeemaker is turned off. Follow directions in "Cleaning Your Drip
Coffeemaker" section of the manual.
 This coffeemaker features an automatic shutoff as a safety feature. The
auto-off feature can be programmed for 1 to 4 hours. If auto-off isn't
programmed, the coffeemaker will turn off after 2 hours.

Pause & Serve Feature: The Pause & Serve Feature allows you to pour a
cup of coffee while still in the brewing process. For optimum flavor, allow half
the amount of coffee to finish brewing before removing the carafe. Return
carafe within 30 seconds so the coffee may continue to brew and to avoid hot
water or hot coffee overflow. To prevent scald injury, do not remove any
part of appliance, other than carafe, during the brew cycle.
Please note for the below mode settings: This coffeemaker also has an auto-set
feature. If "Min/Select" (
that function will be activated.
U
SING
®
Your West Bend
brew at a pre-programmed time.
1. Prepare your coffeemaker as described in the "Preparing Coffee" section of this
manual, but do not turn the coffeemaker on when ready. Make sure the clock
has been set to the correct time of day and that the
carafe with cover is in place.
2. Press the "Program" button until "DELAY" appears in
the display.
3. With "DELAY" in the display, press the "Hr/Cancel" ( ) button until the desired
hour and AM or PM appear. To fast forward numbers, press and hold the
"Hr/Cancel" ( ) button.
4. With "DELAY" in the display, press the "Min/Select" (
minutes appear. To fast forward numbers, press and hold the "Min/Select" (
button.
Note: If you go beyond the desired time, press the respective button until correct
time appears.
5. Press "Delay" to save and set the setting. Your coffeemaker will turn on and begin
the brewing process at the programmed time. The "Delay" button must be pressed
for delayed start to begin brewing at the set time.
If the carafe is removed before the programmed time or before the end of the brew
cycle, it must be returned properly to the warming plate so that the coffee may brew
and avoid hot water or hot coffee overflow.
English - 5
) is not pressed after 4 blinks of the setting in the display,
Y D C
OUR RIP OFFEEMAKER
Coffeemaker can be set up to 24-hours in advance to turn on and
- D S
ELAYED TART
) button until the desired
)