Pioneer AVIC-EVO1 Operation Manual page 25

Customising preferences of the navigation
"Navigation Map" settings
Map Display
You can see the effect when you change a setting.
Viewpoint
You can adjust the basic zoom and tilt levels to your needs.
Some preset levels are available. If you select "Manual", you
can store adjusted map scales and view angles.
Colour Mode
You can switch between daytime and nighttime colour
modes or let the software switch between the two modes
automatically a few minutes before sunrise and a few min-
utes after sunset.
Day Map Colour
You can select the colour scheme used in the daytime map.
Night Map Colour
You can select the colour scheme used in nighttime map.
Landmarks
This setting shows or hides 3D landmarks which are 3D
artistic or block representations of prominent or well-known
objects.
Buildings
This setting shows or hides 3D city models which are 3D
artistic or block representations of complete city building
data containing actual building sizes and actual positions
on the map.
3D Terrain
This setting shows or hides the 3D elevation of the surround-
ing terrain.
Track Logs
You can turn on or off track log saving which saves the
sequence of the locations you go through on your journeys.
Place Markers
You can select which POI icons to show on the map while
navigating.
p When a large number of POI icons exist on a map display,
maps and POI icons become hard to see. To maintain
map and POI visibility, reduce the displayed categories as
much as possible.
Data Fields
You can choose to have different values displayed for when nav-
igating a route to a select destination and for when just cruising
around without any particular destination.
Refer to Browsing the data field on page 12
"First", "Second" and "Third" selects items displayed in the data
fields shown when the route exists. "Without Route" selects
the items displayed in the data fields shown when a route does
not exist.
Route Progress Bar
You can turn on the route progress bar to display the current
route as a straight line located on the right side of the map. The
arrow represents your current position and moves up the line as
you travel along the route.
Offer Motorway Services
You may need to stop by a petrol station or a restaurant during
your journey.
Refer to Frequently shown route events on page 11
Services Displayed
You can select the service types displayed for the motorway exits
or service stations. Choose from the POI categories.
Automatic Overview
When selected, the map zooms out to show an overview of the
surrounding area if the next route event (manoeuvre) is far.
When you get close to the event, the map returns to the normal
map view.
Signposts
Whenever adequate information is available, lane information
similar to the real ones on road signs above the road is displayed
at the top of the map. You can turn this feature on or off.
Junction View
If you are approaching a motorway exit or a complex intersection
and the necessary information is available, the map is replaced
with a 3D view of the junction.
Tunnel View
When entering tunnels, the surface roads and buildings can
be distracting. This feature shows a generic picture of a tunnel
instead of the map. A top-down overview of the tunnel and
remaining distance are also displayed.
Offer Congestion Detour on Highways
When you slow down while driving on a motorway due to a traffic
jam, this navigation system offers you a detour using the next
exit. The message shows you the distance to the exit and the
difference in the distance and estimated time compared to the
original route. You can choose from one of the following options:
Touch [Dismiss] or just ignore the message if you want to
keep the original route.
Touch [Preview] to see an overview of the original route and
the detour to make the decision. You can accept the detour
as shown in the preview, or increase the motorway segment
bypassed before accepting.
Turn to the suggested new direction and the route will be
automatically recalculated.
Offer Real Time Alternative Routes
Alternative routes can be suggested when driving on normal
roads. This navigation system will select a different turn in the
upcoming intersection and offer you a different route for the next
section of the route. You cannot, however, modify the offered
detour.
Offer Parking Around Destination
Parking at the destination may not be easy to find in city areas.
As you approach the destination, this navigation system can
offer parking category places near your destination. Touch
to open a top-down map with the destination and the offered
parking places. The route is calculated by selecting one of the
parking places.
Offer Hints Upon Detour
If you leave the recommended route and suddenly exit the motor-
way, this navigation system offers different alternatives near the
exit like petrol stations or restaurants. Also, if there are avoidable
parts of the original route ahead (like a tunnel, a toll road or a
ferry), you will find them in the list in case you want to bypass
them with the help of this navigation system.
"Regional" settings
Language
This key displays the current language of the user interface. By
touching the key, you can select a new language from the list of
available languages. This system will restart if you change this
setting.
Voice Language
This key displays the current voice guidance profile. By touching
the key, you can select a new voice guidance language from the
list of available languages and speakers. Touch any of these keys
to hear a sample voice prompt.
Units and Formats
You can set the various units to be used by this system.
p This system may not support all the listed units in some
voice guidance languages.
Distance
The unit of distance can be changed.
Fuel Economy
The unit of fuel mileage can be changed.
Weight
25