Operation Methods - Bissell Total Floors Pet 61C5 SERIES Quick Manual

Cooling mode
● After machine turns on, default value is cooling mode with 22℃ and low fan speed.
● Press " MODE" to select cooling mode, cooling mode indictor turns on .
● Press " UP" or " DOWN" to adjust temperature ( from 16℃ to 31℃).
● Press " FAN" to select fan speed(low, medium ,high)
Fan mode
● Press " MODE" to select fan mode, fan mode indicator turns on .
● Press " FAN" to select fan speed(low, medium ,high)
● Temperature and sleeping function cannot be setup.
Timer mode
● Under standby mode, press "TIMER" to setup the power-on time, press "UP" and
"DOWN" to adjust the timer (from 1 to 24). Timer indicator turns on.
● Under power-on mode, press "TIMER" to setup power-off timer. Press "UP" and
"DOWN" to adjust the timer (from 1 to 24). Timer indicator turns on.
Sleeping mode
● Press key "SLEEP" enter into sleeping mode, default value of fan speed is low.
●When sleeping mode turns on , under cooling mode, the one hour later, setting
temperature will go up 1℃, the second one hour later, setting temperature will go up
another 1℃, and then keep the same ; under heating mode, the first one hour later,
setting temperature will go down 1℃, the second one hour later , the setting
temperature will go up another 1℃, and then keep the same .
● Sleeping mode is invalid under dehumidifying and fan mode. Under water full, machine
standby and mode conversion, sleeping mode will be cancelled .
Compressor protection
● Three minutes later after power on / restart, compressor starts to run.

Operation Methods

8