Intelligent Flight Mode - dji Mavic pro User Manual

Using DJI Assistant 2
Follow the instructions below to update the firmware through DJI Assistant 2:
1. Connect the aircraft to a computer with a USB cable.
2. Launch DJI Assistant 2 and login with your DJI account.
3. Select "Mavic Pro" and click on the "Firmware Updates" on the left panel.
4. Select the firmware version that you wish to update.
5. Wait for the firmware to be downloaded and firmware update will start automatically.
6. Reboot the aircraft after the firmware update is complete.
The remote controller can be connected to a computer for upgrades. Turn off the remote controller and
connect the charging port to the computer, then turn on the remote controller. The remote controller and
the aircraft can be upgraded simultaneously.
The firmware update will take around 15 minutes. It is normal that the gimbal goes limp, aircraft
status indicator blinks abnormally and the aircraft reboots. Please wait patiently until the update
is complete.
There will be no sound prompts during the update.
Ensure the computer has access to the Internet.
Ensure the battery level is adequate for the Intelligent Flight Battery.
Do not disconnect the aircraft from the computer during firmware update.

Intelligent Flight Mode

Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and
Waypoints features to assist users to create professional shoots during the flight. Course Lock and Home
Point lock helps to lock the orientation of aircraft so that the user can focus more on other operations.
Point of Interest, Follow Me and Waypoints mode enable aircraft to fly automatically according to the
pre-set flight maneuvers.
Lock the current nose direction as the aircraft's forward direction. The aircraft will
Course Lock
move in the locked directions regardless of its orientation (yaw angle).
Home Lock Pull the pitch stick backward to move the aircraft toward its recorded Home Point.
The aircraft will orbit around the subject automatically to allow the operator can be
Point of Interest
more focus on framing their shoot on the subject in Point of Interest.
A virtual tether is created between the aircraft and the mobile device so that the
Follow Me aircraft can track your movement as you move. Note that Follow Me performance is
subject to the GPS accuracy on the mobile device.
Record a flight path, then the aircraft will fly along the same path repeatedly
Waypoints while you control the camera and orientation. The flight path can be saved and
re-apply in the future.
Enable Multiple Flight Mode by launching the DJI GO app > Camera View >
before using the Intelligent Flight Mode for the first time.
Mavic Pro User Manual
> Multiple Flight Mode
©
2016 DJI All Rights Reserved.
57