Date Format - Panasonic HDC-SDX1 Operating Instructions Manual

4 (Only when setting the region of your travel destination)
Touch [DESTINATION].
≥ Touch [ENTER].
≥ When the home region is set for the first time, the screen for selecting home/travel
destination appears after setting the home region successively. If the home region has
already been set once, execute the menu operation for step 1.
5 (Only when setting the region of your
travel destination)
Touch /
destination and touch [ENTER].
≥ Touch [SUMMER TIME SET] to set
daylight saving time.
the summer time setting is turned on.
The travel destination time and time
difference from the home region time are
set forward by one hour. Touch
[SUMMER TIME SET] again to return to
the normal time setting.
≥ Close the setting by pressing the MENU
button. appears and the time of the
travel destination is indicated.
To return the display to the home setting
Set the home region using step 1 to 3, and close the setting by touching [EXIT] or pressing
the MENU button.
≥ If you cannot find your travel destination in the area shown on the screen, set it by using
the time difference from your home region.
[DATE/TIME]
It is possible to change the date and time display mode.

[DATE FORMAT]

It is possible to change the date format.
[ECONOMY]
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥ The power save function will not activate when:
j connected to AC adaptor
j using the USB cable for PC, DVD burner etc.
j PRE-REC is used
34
VQT2W75
to select your travel
appears and
[OFF]/[D/T]/[DATE]
[Y/M/D]/[M/D/Y]/[D/M/Y]
[OFF]/[5 MINUTES]
C The local time at the selected travel
destination
D The time difference between the
travel destination and the home
region

