Table of Contents
Advertisement
3.10
Installing the fuel cartridge holder
•
Fuel cartridges and reserve fuel cartridges must not be placed in front
of the inlet or outlet for the exhaust heat flow.
•
Fuel cartridges can be placed next to the device or in front of it, as
shown in the chapter entitled "Example for positioning of the fuel
cartridge" on page 38.
•
The device and the fuel cartridge must be installed at the same height.
Page 42
3.
Use a suitable sealant to seal the hole.
Ensure that the exhaust hose has no
kinks or blockages and that the waste
gases can flow freely out of it. Please
also pay particular attention to the
information about siphoning in the
chapter entitled "Important guidelines
on choosing a location for installation"
on page 37.
INFO:
Please keep the exhaust hose as
short as possible. The portion of the
hose that penetrates outside should
be no longer than 5 cm. Cut the end
of the hose diagonally to prevent
drop formation.
4.
The further steps involved in installing
the EFOY fuel cell are described in the
user manual.
1.
Thread the belt into the fuel cartridge
holder.
Mounting Instructions
Advertisement
Table of Contents
