Table of Contents
Advertisement
3.2
Tools
You require the following tools and sealants to install the fuel cell:
•
Electric drill
•
Jigsaw
•
Screwdriver
•
3 mm Allen key (Inbus)
•
Sealant
•
Scissors or cutters
Choose the following screws depending on the mounting surface (screws
are not included in the delivery):
•
8 screws to secure the mounting plate (use 90° countersunk screws
with a 5 mm diameter. The shape of the shaft and thread depends on
the material on which the mounting plate is to be secured.)
•
4 screws to secure the operating panel
•
4 screws to secure the fuel cartridge holder (use screws with a 5 mm
diameter. The shape of the shaft and thread depends on the material on
which the fuel cartridge holder is to be secured.)
•
Cable clamps to secure the cables if required
3.3
Important guidelines on choosing a location for installation
Installation should be carried out by trained personnel.
Ensure that there is sufficient unoccupied space behind the installation
area before you drill or saw any openings. Please also observe the safety
information provided by the tool manufacturers.
CAUTION!
Solvents may emit fumes during sealing. Ensure that there is sufficient
ventilation and follow the instructions for using the sealing compound.
Page 34
Mounting Instructions
Advertisement
Table of Contents
