Table of Contents
Advertisement
Mounting Instructions
3.7
Creating openings for the off-heat duct and exhaust hose
The mounting instructions provided here are based on a scenario in which
the waste heat is conducted through the base of the installation space.
Follow the same steps if the waste heat is to be conducted through the side
panel of the installation space.
2.
Secure the mounting plate in the
desired location using eight 90°
countersunk screws with a 5 mm
diameter. Use suitable screws and, if
necessary, dowels to ensure that the
mounting plate will remain in place
even if significant force is applied to it,
for example, in the event of an
accident.
3.
Place the device on the mounting
plate.
1.
Attach the off-heat bow to the off-heat
flange.
Page 39
Advertisement
Table of Contents
