Download Print this page
Anviz M5 Quick Manual
Anviz M5 Quick Manual

Anviz M5 Quick Manual

Outdoor fingerprint and card reader/controller
Hide thumbs Also See for M5:

Advertisement

Quick Links

Advertisement

loading
Need help?

Need help?

Do you have a question about the M5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Anviz M5

  • Page 4 1.42in.(36mm) 2.52in.(64mm) 0.41in.(10.5mm)
  • Page 5 RS485B/GND RS485A/Pulse signal (3.3V) Anviz Wiegand Wiring: +12V ‘Anviz Wiegand Switch’ cable must be +12V connected with...
  • Page 6 Then move slide switch to right(OFF). Wiegand 26 Wiring: Let the 'Anviz Wiegand Switch' cable is not connected to the GND and make sure correct wiring between M5 and Anviz SAC844 or other Access Controller as below: Wiegand date output format: ①...
  • Page 7 Put the CD in the managemet computer. The installation program will run automatically. Loose the screw on the bottom of M5, then pull up the front case, seperate from back panel Connect USB cable between with M5 and PC which has installed software...
  • Page 8 Local Area Network (TCP/IP) Right click on the device icon and choose ‘Set the IP configuration’ to set correct network enviroment parameters such as above window.